Description
The Firenze-KH8 is a powerful, top-of-the-line touring system featuring Slim Array Technology (SAT) and Electronic Beam Steering (EBS). Self-powered and weather resistant, the KH8 produces an exceptional peak output of 145 dB SPL and is fully controlled by 8 onboard DSPs for maximum operational flexibility offering a unique solution to the live sound market.
The state-of-the-art rigging system allows you to pre-cable stacks of 3 units to fly a straight 24-unit cluster in less than 10 minutes. This is possible because it is not necessary to dismount the entire cluster: the speakers are anchored in groups of three within rigid frames that can be connected quickly to create longer clusters. Compared to traditional systems that require wiring and a mechanical connection for each speaker, the KH8 cuts down on time for a cost-sensitive solution.
The Firenze-KH8 is a powered IP45 system with an integrated IP65 electronic enclosure, to resist even heavy rain.
Specifications
Acoustics
- Power Handling `2000 W(AES) + 800 W(AES)
- 280W(AES)`
- Max power 6160 W(AES)
- Frequency range 60 Hz – 18 kHz (- 3dB) (1)
- SPL 1W/1mt 102.4 dB (Low) – 99.5dB (Mid) – 119 dB (High) (2)
- Maximum SPL 145dB (3)
Coverage
- Horizontal 120°
- Vertical Digitally adjustable
Crossover
- Type DSP Controlled
- Frequency 300 Hz (Low-Mid); 1300 Hz (Mid-High)
Transducers
- Full range 8 X 8” Neodymium magnet woofer with 2.5” voice coil 8 X 4” neodymium magnet woofer with 1.5” voice coil 4 X 1.4” neodymium magnet compression driver with 1.5” voice coil
Remote control & Audio in/out
- Connectors 1 Male + 1 Female LK25 connector (IP67)
- Connection 1 Analog audio – 2 AES/EBU – Remote control over IP
Power input
- Connector 1 x PowerCon TRUE1 (IP65)
Amplifier
- Type 2 Module class D with PFC – DSP controlled
- Nominal Output Power 8 x 2000 W @ 4 Ω 1% THD + NOISE (4)
- Protection Over Temp.(Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
- Frequency response 20 Hz – 20 kHz (+0 -1 dB) for 1 W @ 8 Ω
- Damping factor @ 100 Hz >10000
- THD+N 1W to Full Power @ 4 Ω 0.2%
- Thermal dissipation 1/4 of max output power @ 4 Ω = 2000 BTU/h (505Kcal/h)
- Efficiency > 75% (typical)
- 1/8 rated power (pink noise) @ 4 Ω per channel 1250 W
Certifications
- Electronics 65
- Speaker Box 45
Physical
- Dimensions (Per Unit) 117 cm x 50 cm x 20 cm (46.1“ x 19.7” x 7.88“)