Description
– 4 channel amplifier
– 2000 W per channel at 4 ohms
– Versatile, compact and highly energy-efficient
– Dante networked audio
The DX-80I are DSP processing amplifiers that offer the same power outputs as the DX-80. DX-80I accepts analog, AES3 digital and optional Dante networked audio. It can connect to any source and make it available over the network, as well as processing four additional channels with local analog outputs to connect to non-DSP DX Series amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DX amplifiers that have Dante cards fitted, or by any other Dante enabled device. Connectivity for remote control is covered by USB, Ethernet and RS485, with a relay of either USB or Ethernet control via RS485 to work with legacy products.
| Stereo Mode (both channels driven) 8 ohms EIA 1 kHz 1% THD |
4 x 1000 W |
| 4 ohms EIA 1 kHz 1% THD | 4 x 2000 W |
| 2 ohms EIA 1 kHz 1% THD | 4 x 2000 W |
| Bridge Mono Mode 8 ohms EIA 1 kHz 1% THD |
2 x 4000 W |
| 4 ohms EIA 1 kHz 1% THD | 2 x 4000 W |
| Frequency Response | 0.5 dB (20 Hz – 20 kHz) |
| Total Harmonic Distortion (20 Hz-20 kHz) | < 0,2 % |
| Damping Factor @ 8 ohms | > 500 |
| Voltage Gain | 32 dB |
| Output Circuitry | Class D |
| AC Requirements | 5 A, 240 VAC (4 ohms) 10 A, 120 VAC (4 ohms) |
| Dimensions (H x W x D) | 8.8 x 48.2 x 42.8 cm 3.5 x 19 x 16.9 in |
| Weight | 10.3 kg (22.7 lb) |