Description
Key Features
- Advanced HD video, control and KVM over network infrastructure
- Extends HDMI up to a distance of 100m over a single CAT cable
- Supports unicast transmission over unmanaged networks
- Supports multicast transmission for large managed networks
- In-built video scaler to allow for inclusion of displays with differing resolution capabilities (1080p max)
- Supports up to 1080p 60Hz video output
- Supports PCM 2.0 channel audio only
- Advanced signal management for independent routing of IR, RS-232, USB/KVM, and video/audio
- PoE (Power over Ethernet) to power Blustream products from PoE switch
- HDCP1.4 compliant with advanced EDID management
- Analogue L/R audio breakout
- Local 12V 1A power supply should Ethernet switch not support PoE (not included)
- Features 2 operational modes: Matrix distribution (requires 100Mbps network switch) & One-to-one HDMI extender (no network switch required)
Specifications
- Video Input Connectors: 1 x LAN RJ45 connector,
- Video Output Connectors: 1 x HDMI Type A, 19-pin, female, locking
- Audio Output Connectors: 1 x 3-pin Phoenix connector
- Ethernet port: 1x LAN RJ45 connector (video extension)
- RS-232 serial port: 1 x 3-pin Phoenix connector
- USB/KVM Device Ports: 2 x USB-Type A
- IR Input ports: 1 x 3.5mm stereo jack
- IR Output ports: 1 x 3.5mm mono jack
- Mounting kit included
- Dimensions (W x D x H): 190mm x 95mm x 25mm
- Dimensions Including Connections (W x D x H): 190mm x 100mm x 25mm, without feet
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
Box Contents
- 1 x IP50HD-RX
- 1 x IR Receiver
- 1 x IR Emitter
- 1 x Mounting Kit
- 4 x Rubber Feet
