Description
– 2100 W x 2100 W at 4 Ω
– Input Sensitivity Selector
– Stereo/Bridged/Parallel Operation
– speakON output connectors
– Clip, protection and Signal present LED indicators
The PA 4000 stereo amplifier is for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit, operational mode selection (bridge, stereo or parallel) and input sensitivity selection.
Product features
| Stereo Mode (both channels driven) 8 ohms EIA 1 kHz 1% THD |
1400 W |
| 4 ohms EIA 1 kHz 1% THD | 2100 W |
| Bridge Mono Mode 8 ohms EIA 1 kHz 1% THD |
4200 W |
| Frequency Response | 20 Hz-20 kHz +0-1 dB |
| Signal to Noise Ratio (20 Hz-20 kHz) | > 100 dB |
| Distortion (SMPTE-IM) | ≤ 0.35% |
| Total Harmonic Distortion (20 Hz-20 kHz) | <0.5% |
| Damping Factor @ 8 ohms | > 200 |
| Input Sensitivity @ 4 ohms | 0.775 V o 1.4 V0 |
| Voltage Gain | 37 dB |
| AC Requirements | 230 V AC 50 Hz |
| Current Draw (1/3 power @ 230 V) | 15.2 A |
| Dimensions (H x W x D) | 8.8 x 48.2 x 29.4 cm |
| 3.5 x 19 x 11.6 in | |
| Weight | 19.5 kg |
| 43 lb |
