Description
– 250 W x 250 W at 4 Ω
– Input Sensitivity Selector
– Stereo/Bridged/Parallel Operation
– speakON output connectors
– Clip, protection and Signal present LED indicators
The PA 500 stereo amplifier is for both installed or mobile sound reinforcement applications. The amplifiers incorporate a rugged 2 unit all-steel chassis ensuring structural rigidity. The low-noise fans offer both quiet and cool operation. The amplifier incorporates rear located switches which permit, operational mode selection (bridge, stereo or parallel) and input sensitivity selection
Product features
| Stereo Mode (both channels driven) 8 ohms EIA 1 kHz 1% THD | 150 W |
| Bridge Mono Mode 8 ohms EIA 1 kHz 1% THD | 400 W |
| Frequency Response | 20 Hz-20 kHz +0-1 dB |
| Signal to Noise Ratio (20 Hz-20 kHz) | > 100 dB |
| Distortion (SMPTE-IM) | ≤ 0.35% |
| Total Harmonic Distortion (20 Hz-20 kHz) | ≤ 0.35% |
| Damping Factor @ 8 ohms | > 200 |
| Input Sensitivity @ 4 ohms | 0.775 V o 1.4 V |
| Voltage Gain | 27 dB |
| AC Requirements | 230 V AC 50 Hz |
| Current Draw (1/3 power @ 230 V) | 2.8 A |
| Dimensions (H x W x D) | 8.8 x 48.2 x 22.7 cm |
| 3.5 x 19 x 8.9 in | |
| Weight | 10.1 kg |
| 22.3 lb |
